juniperSRX防火墙NAT测试

1.测试拓扑:

专注于为中小企业提供网站设计制作、成都网站设计服务,电脑端+手机端+微信端的三站合一,更高效的管理,为中小企业枝江免费做网站提供优质的服务。我们立足成都,凝聚了一批互联网行业人才,有力地推动了1000多家企业的稳健成长,帮助中小企业通过网站建设实现规模扩充和转变。

juniper SRX防火墙NAT测试

2.测试总结:

3.基本配置:

A.路由器R1:

interface Ethernet0/0
 ip address 202.100.1.1 255.255.255.0
 no shut

B.防火墙SRX:

①配置接口地址:

set interfacesge-0/0/0.0family inetaddress 202.100.1.10/24

set interfacesge-0/0/1.0family inetaddress 10.1.1.10/24

set interfacesge-0/0/2.0family inetaddress 192.168.1.10/24

②将接口划入zone:

setsecurity zones security-zone untrust interfacesge-0/0/0.0

setsecurity zones security-zone trust interfacesge-0/0/1.0

setsecurity zones security-zone dmz interfacesge-0/0/2.0

③配置zone间策略,允许trust到untrust的任何访问:

setsecurity policies from-zone trust to-zone untrust policy Permit-All match source-address any

setsecurity policies from-zone trust to-zone untrust policy Permit-All match destination-address any

setsecurity policies from-zone trust to-zone untrust policy Permit-All match application any

setsecurity policies from-zone trust to-zone untrust policy Permit-All then  permit

配置zone间策略,允许DMZ到untrust的任何访问:

set security policies from-zone dmz to-zoneuntrust policy Permit-All match source-address any

set security policies from-zone dmz to-zoneuntrust policy Permit-All match destination-address any

set security policies from-zone dmz to-zoneuntrust policy Permit-All match application any

set security policies from-zone dmz to-zoneuntrustpolicy Permit-All then permit

C.主机PC1:

IP:10.1.1.8/24

GW:10.1.1.10

D.路由器R2:

interface f0/0
 ip address 192.168.1.2 255.255.255.0

 no shut

ip route 0.0.0.0 0.0.0.0 192.168.1.10

4.NAT配置:

A.第一种NAT:

Source NAT:Interface NAT配置:

A.指定NAT的zone:

setsecurity nat sourcerule-set Source-NAT from zone trust

setsecurity nat sourcerule-setSource-NATto zone untrust

B.配置Interface NAT:

setsecurity nat source rule-set Source-NAT rule NAT-Interface match source-address 0.0.0.0/0

setsecurity nat source rule-set Source-NAT rule NAT-Interface match destination-address 0.0.0.0/0

setsecurity nat source rule-set Source-NAT rule NAT-Interface then source-nat interface

C.提交配置:

commit

D.验证:

从主机PC1上面ping路由器R1接口地址,并在R1上debug ip icmp,可以看到ICMP源地址为防火墙接口地址

R1#
*Mar 2 01:35:56.797: ICMP: echo reply sent, src 202.100.1.1, dst 202.100.1.10
*Mar 2 01:35:57.793: ICMP: echo reply sent, src 202.100.1.1, dst 202.100.1.10
*Mar 2 01:35:58.809: ICMP: echo reply sent, src 202.100.1.1, dst 202.100.1.10
*Mar 2 01:35:59.749: ICMP: echo reply sent, src 202.100.1.1, dst 202.100.1.10
R1#

B.第二种NAT:

Source NAT:pool based nat配置:

A.配置地址池:

set security nat source pool src-nat-pool1address 202.100.1.11 to 202.100.1.13

B.指定NAT的zone(前面已经配置,可以不配):

set security nat source rule-set Source-NAT from zone trust

set security nat sourcerule-set Source-NATto zone untrust

C.配置pool based nat:

set security nat source rule-set Source-NAT rule NAT-pool match source-address 0.0.0.0/0

sets ecurity nat source rule-set Source-NAT rule NAT-pool match destination-address 0.0.0.0/0


分享题目:juniperSRX防火墙NAT测试
文章链接:http://ybzwz.com/article/psjics.html