如何解析sql_slave_skip_counter 参数的用法，很多新手对此不是很清楚，为了帮助大家解决这个难题，下面小编将为大家详细讲解，有这方面需求的人可以来学习下，希望你能有所收获。

网站建设哪家好，找创新互联！专注于网页设计、网站建设、微信开发、微信小程序定制开发、集团企业网站建设等服务项目。为回馈新老客户创新互联还提供了达日免费建站欢迎大家使用！

这里浅析一下sql_slave_skip_counter的具体用法和意义！

set global sql_slave_skip_counter = N
This statement skips the next N events from the master. 
(即是跳过N个events，这里最重要的是理解event的含义!在MySQL中,对于sql的 binary log 实际上是由一连串的event组成的一个组,即事务组。)
在备库上设置 global sql_slave_skip_counter =N 会跳过当前时间来自于master的之后N个事件,这对于恢复由某条SQL语句引起的从库复制有效. 此语句只在当slave threads是停止时才有效,否则将发生一条错误..每忽略一个事件，N 减一，直到N减为0！
When using this statement, it is important to understand that the binary log is actually organized as a sequence of groups known as event groups. Each event group consists of a sequence of events.
For transactional tables, an event group corresponds to a transaction.
For nontransactional tables, an event group corresponds to a single SQL statement.
Note
   A single transaction can contain changes to both transactional and nontransactional tables.When you use SET GLOBAL sql_slave_skip_counter to skip events and the result is in the middle of a group, the slave continues to skip events until it reaches the end of the group. Execution then starts with the next event group
### comment ###
   Setting this variable isn't like setting other server variables: you can't read the variable back again as @@sql_slave_skip_counter, and it isn't really a "global variable." Rather, it's a variable that only the slave thread reads.
  When you restart the slave threads again with START SLAVE, the slave skips statements and decrements the variable until it reaches 0, at which point it begins executing statements again. You can watch this happening by executing SHOW SLAVE STATUS, where the variable's value appears in the Skip_Counter column. This is the only place you can see its value.
  The effect is that the setting isn't persistent. If you set it to 1, start the slave, and the slave has an error in replication sometime later, the variable won't still be set to 1. It'll be 0. At that point, if you want the slave to skip the statement that caused the error, you'll have to set it to 1 again.

有关"SET GLOBAL sql_slave_skip_counter"的语法可以参考官方文档

测试环境：

rac3 主库

rac4 备库

测试之前保证主从无数据延时，保证数据一致！

1 使用含有 stop slave 的命令， 在主库上创建测试表，并使用shell 插入数据！

mysql> create table tab_skip(id int);
Query OK, 0 rows affected (0.80 sec)

[root@rac3 mysql]#

 for i in {1..100}; 

   do 

    echo $i; 

    echo "insert into tab_skip(id) values($i)" | mysql -h227.0.0.1 test ; 

    sleep 1;

done;

在备库 使用 set global sql_slave_skip_counter=1;命令做测试

[root@rac4 mysql]# 

for i in {1..10}; 

do 

   echo $i; 

   echo "slave stop;set global sql_slave_skip_counter=1; slave start;show slave status\G" | mysql -h227.0.0.1 -P3306 test ; 

   sleep 2;

done;

分别在主库和备库上进行验证数据的完整性:

主库上面:

[root@rac3 mysql]# mysql
mysql> use test;                 
Database changed
mysql> select count(1) from tab_1;
+----------+
| count(1) |
+----------+
|      100 |
+----------+
1 row in set (0.00 sec)

备库上面,少了 10条数据！因为正是执行set global sql_slave_skip_counter=1;使备库执行sql replay的时候忽略了事件！

[root@rac4 mysql]# mysql
mysql> use test;
Database changed
mysql> select count(1) from tab_1;  
+----------+
| count(1) |
+----------+
|       90 |
+----------+
1 row in set (0.00 sec)

有网友测试的是在备库上执行没有stop slave 语句的命令，但是在5.5.18版本上面是不允许的！

[root@rac3 mysql]# for i in {1..100}; do echo $i; echo "insert into tab_2(id) values($i)" | mysql -h227.0.0.1 test ; sleep 2;done;   
1

....

100

在备库上执行，注："set global sql_slave_skip_counter=1; slave start;show slave status\G"  没有stop slave 语句，报错！

[root@rac4 mysql]# for i in {1..10}; do echo $i; echo "set global sql_slave_skip_counter=1; slave start;show slave status\G" | mysql -h227.0.0.1 -P3306 test ; sleep 2;done;          
1
ERROR 1198 (HY000) at line 1: This operation cannot be performed with a running slave; run STOP SLAVE first
2
ERROR 1198 (HY000) at line 1: This operation cannot be performed with a running slave; run STOP SLAVE first
3
ERROR 1198 (HY000) at line 1: This operation cannot be performed with a running slave; run STOP SLAVE first
4
ERROR 1198 (HY000) at line 1: This operation cannot be performed with a running slave; run STOP SLAVE first
5 

使用 该参数能够解决从服务器sql 进程停止导致的数据库不同步，但是也有一定的风险，比如在高并发的数据库环境下，可能会导致数据丢失！

另见另一位网友的测试实验(多少有些出入，他的可以不使用stop slave)

看完上述内容是否对您有帮助呢？如果还想对相关知识有进一步的了解或阅读更多相关文章，请关注创新互联行业资讯频道，感谢您对创新互联的支持。

标题名称：如何解析sql_slave_skip_counter参数的用法
转载来于：http://ybzwz.com/article/pdschg.html