device-mapper块级重删(dmdedup)<3>代码结构(3)
五、代码结构(3) I/O写流程
十余年的淮上网站建设经验，针对设计、前端、开发、售后、文案、推广等六对一服务，响应快，48小时及时工作处理。全网营销推广的优势是能够根据用户设备显示端的尺寸不同，自动调整淮上建站的显示方式，使网站能够适用不同显示终端，在浏览器中调整网站的宽度，无论在任何一种浏览器上浏览网站，都能展现优雅布局与设计，从而大程度地提升浏览体验。成都创新互联公司从事“淮上网站设计”,“淮上网站推广”以来，每个客户项目都认真落实执行。
上一篇我们来介绍了dm dedup的空间管理
这一篇我们介绍核心流程I/O写流程
要看的特别清楚这部分的内容，需要结合我之前写过的《device-mapper 块级重删(dm dedup) <2>设计》请添加链接描述一起学习。
在块级重删 设计那一篇已经描述了这一系列的过程。
上一篇代码结构已经对kvs_hash和kvs_lbn的lookup和insert有了分析。
接下来我们来看看lookup和insert在写流程中的使用。
首先我们先看一下alloc_pbn_block给lbn的函数，后面都会用用到。
【
/*因为现在还没有pbn来放置lbn，所以先申请一个pbn_new*/
static int alloc_pbnblk_and_insert_lbn_pbn(struct dedup_config *dc,
u64 *pbn_new,
struct bio *bio, uint64_t lbn)
{
int r = 0;
struct lbn_pbn_value lbnpbn_value;
r = allocate_block(dc, pbn_new);/*找到一个新的pbn*/
lbnpbn_value.pbn = *pbn_new;
do_io(dc, bio, *pbn_new); /*将bio的数据放置到pbn_new的位置*/
r = dc->kvs_lbn_pbn->kvs_insert(dc->kvs_lbn_pbn, (void *)&lbn,
sizeof(lbn), (void *)&lbnpbn_value,
sizeof(lbnpbn_value));
/*将新的lbn_pbn的关系记录到kvs_lbn_pbn中*/
return r;
}
】1、no hash && no lbn
即：① compute_hash_bio(dc->desc_table, bio, hash)； //对bio的data进行hash，获得到hash_pbn
-> ② dc->kvs_hash_pbn->kvs_lookup; //通过hash值，查找对应的hash_pbn_value，也就是pbn。
没有找到pbn ->③ handle_write_no_hash.[dc->kvs_lbn_pbn->kvs_lookup] //寻找bio的lbn是否存在
没有找到lbn -> ④ handle_write_no_hash.[__handle_no_lbn_pbn] //这里到了最终处理函数
这里为了减少篇章，去掉了资源申请错误处理和资源访问错误处理
static int __handle_no_lbn_pbn(struct dedup_config *dc,
struct bio *bio, uint64_t lbn, u8 *hash)
{
int r, ret;
u64 pbn_new;
struct hash_pbn_value hashpbn_value;
/* Create a new lbn-pbn mapping for given lbn，注意这里是pbn_new */
r = alloc_pbnblk_and_insert_lbn_pbn(dc, &pbn_new, bio, lbn);
/* Inserts new hash-pbn mapping for given hash.
由于dm_io已经将bio数据放置到pbn中，然后hash_pbn记录*/
hashpbn_value.pbn = pbn_new;
r = dc->kvs_hash_pbn->kvs_insert(dc->kvs_hash_pbn, (void *)hash,
dc->crypto_key_size,
(void *)&hashpbn_value,
sizeof(hashpbn_value));
/* Increments refcount for new pbn entry created. 增加一个引用*/
r = dc->mdops->inc_refcount(dc->bmd, pbn_new);
/* On all successful steps increment new write count. */
dc->newwrites++;/* 在dc中记录下newwrites增加，为了更好的统计和分析行为*/
goto out;
/* Error handling code path */
inc_refcount_err:
/* Undo actions taken in hash-pbn kvs insert. */
ret = dc->kvs_hash_pbn->kvs_delete(dc->kvs_hash_pbn,
(void *)hash, dc->crypto_key_size);
kvs_insert_err:
/* Undo actions taken in alloc_pbnblk_and_insert_lbn_pbn. */
ret = dc->kvs_lbn_pbn->kvs_delete(dc->kvs_lbn_pbn,
(void *)&lbn, sizeof(lbn));
ret = dc->mdops->dec_refcount(dc->bmd, pbn_new);
out:
return r;
}2、no hash && has lbn
即：① compute_hash_bio(dc->desc_table, bio, hash)； //对bio的data进行hash，获得到hash_pbn
-> ② dc->kvs_hash_pbn->kvs_lookup; //通过hash值，查找对应的hash_pbn_value，也就是pbn。
没有找到pbn ->③ handle_write_no_hash.[dc->kvs_lbn_pbn->kvs_lookup] //寻找bio的lbn是否存在
找到lbn -> ④ handle_write_no_hash.[__handle_has_lbn_pbn] //这里到了最终处理函数
static int __handle_has_lbn_pbn(struct dedup_config *dc,
struct bio *bio, uint64_t lbn, u8 *hash,
u64 pbn_old)
{
int r, ret;
u64 pbn_new;
struct hash_pbn_value hashpbn_value;
/* Allocates a new block for new pbn and inserts lbn-pbn lapping.注意这是覆盖 */
r = alloc_pbnblk_and_insert_lbn_pbn(dc, &pbn_new, bio, lbn);
/* Inserts new hash-pbn entry for given hash. */
hashpbn_value.pbn = pbn_new;
r = dc->kvs_hash_pbn->kvs_insert(dc->kvs_hash_pbn, (void *)hash,
dc->crypto_key_size,
(void *)&hashpbn_value,
sizeof(hashpbn_value));
/* Increments refcount of new pbn. */
r = dc->mdops->inc_refcount(dc->bmd, pbn_new);
/*注意这里需要将pbn_new+,pbn_old-,这样有可能pbn_old减到可回收的可能*/
/* Decrements refcount for old pbn and decrement logical block cnt. */
r = dc->mdops->dec_refcount(dc->bmd, pbn_old);
dc->logical_block_counter--;
/* On all successful steps increment overwrite count. */
dc->overwrites++; /*这里是overwrites++,和上面的newwrites不一样*/
goto out;
/* Error handling code path. */
dec_refcount_err:
/* Undo actions taken while incrementing refcount of new pbn. */
ret = dc->mdops->dec_refcount(dc->bmd, pbn_new);
inc_refcount_err:
ret = dc->kvs_hash_pbn->kvs_delete(dc->kvs_hash_pbn, (void *)hash,
dc->crypto_key_size);
kvs_insert_err:
/* Undo actions taken in alloc_pbnblk_and_insert_lbn_pbn. */
ret = dc->kvs_lbn_pbn->kvs_delete(dc->kvs_lbn_pbn, (void *)&lbn,
sizeof(lbn));
ret = dc->mdops->dec_refcount(dc->bmd, pbn_new);
out:
return r;
}3、hash && no lbn
即：① compute_hash_bio(dc->desc_table, bio, hash)； //对bio的data进行hash，获得到hash_pbn
-> ② dc->kvs_hash_pbn->kvs_lookup; //通过hash值，查找对应的hash_pbn_value，也就是pbn。
找到pbn ->③ handle_write_with_hash.[dc->kvs_lbn_pbn->kvs_lookup] //寻找bio的lbn是否存在
没有找到lbn -> ④ handle_write_no_hash.[__handle_no_lbn_pbn_with_hash] //这里到了最终处理函数
既然找到了hash_pbn,就是pbn可以复用的，直接将lbn将pbn关联就行
static int __handle_no_lbn_pbn_with_hash(struct dedup_config *dc,
struct bio *bio, uint64_t lbn,
u64 pbn_this,
struct lbn_pbn_value lbnpbn_value)
{
int r = 0, ret;
/* Increments refcount of this passed pbn */
r = dc->mdops->inc_refcount(dc->bmd, pbn_this);
if (r < 0)
goto out;
lbnpbn_value.pbn = pbn_this;
/* Insert lbn->pbn_this entry */
r = dc->kvs_lbn_pbn->kvs_insert(dc->kvs_lbn_pbn, (void *)&lbn,
sizeof(lbn), (void *)&lbnpbn_value,
sizeof(lbnpbn_value));
if (r < 0)
goto kvs_insert_error;
dc->logical_block_counter++;
bio->bi_status = BLK_STS_OK;
bio_endio(bio);
/*bio完成*/
dc->newwrites++;
goto out;
kvs_insert_error:
/* Undo actions taken while incrementing refcount of this pbn. */
ret = dc->mdops->dec_refcount(dc->bmd, pbn_this);
out:
return r;
}4、hash && lbn
即：① compute_hash_bio(dc->desc_table, bio, hash)； //对bio的data进行hash，获得到hash_pbn
-> ② dc->kvs_hash_pbn->kvs_lookup; //通过hash值，查找对应的hash_pbn_value，也就是pbn。
找到pbn ->③ handle_write_with_hash.[dc->kvs_lbn_pbn->kvs_lookup] //寻找bio的lbn是否存在
找到lbn -> ④ handle_write_no_hash.[__handle_has_lbn_pbn_with_hash] //这里到了最终处理函数
既然找到了hash_pbn和lbn_pbn，这里存在了两种情况：
一、overwrite，也就是hash_pbn的pbn和lbn_pbn是一个。
二、No relationship，也就是这是将一个pbn的内容写到一个新的lbn位置
static int __handle_has_lbn_pbn_with_hash(struct dedup_config *dc,
struct bio *bio, uint64_t lbn,
u64 pbn_this,
struct lbn_pbn_value lbnpbn_value)
{
int r = 0, ret;
struct lbn_pbn_value this_lbnpbn_value;
u64 pbn_old;
pbn_old = lbnpbn_value.pbn;
/* special case, overwrite same LBN/PBN with same data */
if (pbn_this == pbn_old)
goto out;
/*如果hash_pbn和lbn_pbn不相等，1、增加pbn引用和新lbn和pbn关联*/
/* Increments refcount of this passed pbn */
r = dc->mdops->inc_refcount(dc->bmd, pbn_this);
if (r < 0)
goto out;
this_lbnpbn_value.pbn = pbn_this;
/* Insert lbn->pbn_this entry */
r = dc->kvs_lbn_pbn->kvs_insert(dc->kvs_lbn_pbn, (void *)&lbn,
sizeof(lbn),
(void *)&this_lbnpbn_value,
sizeof(this_lbnpbn_value));
if (r < 0)
goto kvs_insert_err;
/*减小lbn之前记住的pbn_old的引用，这个pbn_old将可能被回收*/
/* Decrement refcount of old pbn */
r = dc->mdops->dec_refcount(dc->bmd, pbn_old);
if (r < 0)
goto dec_refcount_err;
goto out; /* all OK */
dec_refcount_err:
/* Undo actions taken while decrementing refcount of old pbn */
/* Overwrite lbn->pbn_this entry with lbn->pbn_old entry */
ret = dc->kvs_lbn_pbn->kvs_insert(dc->kvs_lbn_pbn, (void *)&lbn,
sizeof(lbn), (void *)&lbnpbn_value,
sizeof(lbnpbn_value));
if (ret < 0)
DMERR("Error in overwriting lbn->pbn_this [%llu] with"
" lbn-pbn_old entry [%llu].", this_lbnpbn_value.pbn,
lbnpbn_value.pbn);
kvs_insert_err:
ret = dc->mdops->dec_refcount(dc->bmd, pbn_this);
if (ret < 0)
DMERR("Error in decrementing previously incremented refcount.");
out:
if (r == 0) {
bio->bi_status = BLK_STS_OK;
bio_endio(bio);
dc->overwrites++;
}
return r;
}这一篇介绍了，写流程的四种情况，更加清晰了解释了dm dedup设计一文中的流程图。
希望读者看完后，能够对dm dedup这种简单逻辑的方式所吸引，从而喜欢上块重删这个技术。
--------------未完待续--------------
【本文只在51cto博客作者 “底层存储技术” https://blog.51cto.com/12580077 个人发布，公众号发布：存储之谷】，如需转载，请于本人联系，谢谢。
文章题目：device-mapper块级重删(dmdedup)<3>代码结构(3)
文章转载：http://ybzwz.com/article/jpsgid.html
