rpc.rstatd安装
先安装
pm -ivh libgssglue-0.1-11.el6.x86_64.rpm
rpm -ivh libtirpc-0.2.1-11.el6_8.x86_64.rpm
rpm -ivh rpcbind-0.2.0-12.el6.x86_64.rpm
yum install libgssglue yum install rpcbind
还有一个需要找按照包才能安装
再启动 服务
service rpcbind start
成都创新互联是一家专注于成都做网站、网站建设与策划设计,周口网站建设哪家好?成都创新互联做网站,专注于网站建设十年,网设计领域的专业建站公司;建站业务涵盖:周口等地区。周口做网站价格咨询:028-86922220
上传安装包
# rz
rz waiting to receive.
?a? zmodem ′???￡ °′ Ctrl+C ???￡
?[root@localhost home]# rz
rz waiting to receive.
?a? zmodem ′???￡ °′ Ctrl+C ???￡
Transferring rpc.rstatd-4.0.1.tar.gz...
100% 84 KB 84 KB/s 00:00:01 0 Errors
?[root@localhost home]#
[root@localhost home]#
[root@localhost home]# ll
总用量 71228
drwxr-xr-x 2 root root 4096 7月 26 2017 Ajaxterm
drwxr-xr-x 9 root root 4096 7月 26 2017 django
-rw-r--r-- 1 root root 14540 3月 11 2013 epel-release-6-8.noarch.rpm
-rw-r--r-- 1 root root 6718 3月 11 2017 glances.html
-rw-r--r-- 1 root root 72570276 2月 23 2016 jprofiler_linux_9_1_1.rpm
drwxr-xr-x. 7 root root 4096 5月 27 2016 lnmp1.3-full
drwx------ 5 loadrunner root 4096 7月 26 2017 loadrunner
drwx------. 4 lw lw 4096 3月 10 2017 lw
drwx------ 4 nagios nagios 4096 3月 10 2017 nagios
-rwxr-xr-x 1 root root 188749 7月 26 2011 nmon
drwxr-xr-x 2 root root 4096 1月 3 22:42 pythontest
-rw-r--r-- 1 root root 86883 12月 7 2005 rpc.rstatd-4.0.1.tar.gz
drwx------ 4 loadrunner spotlight 4096 6月 26 2017 spotlight
drwxr-xr-x 2 root root 4096 6月 27 2017 test
-rw-r--r-- 1 root root 1806 7月 25 2017 vmstat.txt
drwx------. 4 www www 4096 3月 10 2017 www
drwxrwxrwx. 2 root root 4096 3月 7 2017 wwwlogs
drwxr-xr-x. 3 root root 4096 3月 7 2017 wwwroot
drwxr-xr-x 6 root root 4096 7月 25 2017 xhprof
# 解压
[root@localhost home]# tar -xzvf rpc.rstatd-4.0.1.tar.gz
rpc.rstatd-4.0.1/
rpc.rstatd-4.0.1/README
rpc.rstatd-4.0.1/configure.in
rpc.rstatd-4.0.1/aclocal.m4
rpc.rstatd-4.0.1/Makefile.am
rpc.rstatd-4.0.1/Makefile.in
rpc.rstatd-4.0.1/config.h.in
rpc.rstatd-4.0.1/configure
rpc.rstatd-4.0.1/AUTHORS
rpc.rstatd-4.0.1/COPYING
rpc.rstatd-4.0.1/ChangeLog
rpc.rstatd-4.0.1/INSTALL
rpc.rstatd-4.0.1/depcomp
rpc.rstatd-4.0.1/install-sh
rpc.rstatd-4.0.1/missing
rpc.rstatd-4.0.1/mkinstalldirs
rpc.rstatd-4.0.1/rstat_svc.c
rpc.rstatd-4.0.1/rstat_xdr.c
rpc.rstatd-4.0.1/rstat_proc.c
rpc.rstatd-4.0.1/rstat_main.c
rpc.rstatd-4.0.1/getdata.c
rpc.rstatd-4.0.1/getdata22.c
rpc.rstatd-4.0.1/getdata24.c
rpc.rstatd-4.0.1/getdata26.c
rpc.rstatd-4.0.1/config.h
rpc.rstatd-4.0.1/getdata22.h
rpc.rstatd-4.0.1/getdata24.h
rpc.rstatd-4.0.1/getdata26.h
rpc.rstatd-4.0.1/getdata.h
rpc.rstatd-4.0.1/rstat_proc.h
rpc.rstatd-4.0.1/rsysinfo.c
rpc.rstatd-4.0.1/rstat_clnt.c
rpc.rstatd-4.0.1/rup.c
rpc.rstatd-4.0.1/rstat.x
rpc.rstatd-4.0.1/rpc.rstatd.8
rpc.rstatd-4.0.1/rstatd.8
rpc.rstatd-4.0.1/rsysinfo.1
rpc.rstatd-4.0.1/rup.1
[root@localhost home]# ll
总用量 71232
drwxr-xr-x 2 root root 4096 7月 26 2017 Ajaxterm
drwxr-xr-x 9 root root 4096 7月 26 2017 django
-rw-r--r-- 1 root root 14540 3月 11 2013 epel-release-6-8.noarch.rpm
-rw-r--r-- 1 root root 6718 3月 11 2017 glances.html
-rw-r--r-- 1 root root 72570276 2月 23 2016 jprofiler_linux_9_1_1.rpm
drwxr-xr-x. 7 root root 4096 5月 27 2016 lnmp1.3-full
drwx------ 5 loadrunner root 4096 7月 26 2017 loadrunner
drwx------. 4 lw lw 4096 3月 10 2017 lw
drwx------ 4 nagios nagios 4096 3月 10 2017 nagios
-rwxr-xr-x 1 root root 188749 7月 26 2011 nmon
drwxr-xr-x 2 root root 4096 1月 3 22:42 pythontest
drwxrwxrwx 2 5094 bin 4096 12月 7 2005 rpc.rstatd-4.0.1
-rw-r--r-- 1 root root 86883 12月 7 2005 rpc.rstatd-4.0.1.tar.gz
drwx------ 4 loadrunner spotlight 4096 6月 26 2017 spotlight
drwxr-xr-x 2 root root 4096 6月 27 2017 test
-rw-r--r-- 1 root root 1806 7月 25 2017 vmstat.txt
drwx------. 4 www www 4096 3月 10 2017 www
drwxrwxrwx. 2 root root 4096 3月 7 2017 wwwlogs
drwxr-xr-x. 3 root root 4096 3月 7 2017 wwwroot
drwxr-xr-x 6 root root 4096 7月 25 2017 xhprof
[root@localhost home]# chmod 777 rpc.rstatd-4.0.1
[root@localhost home]# cd rpc.rstatd-4.0.1
[root@localhost rpc.rstatd-4.0.1]# ll
总用量 456
-rw-r--r-- 1 5094 bin 35033 12月 7 2005 aclocal.m4
-rw-r--r-- 1 5094 bin 153 9月 19 2005 AUTHORS
-rw-r--r-- 1 5094 bin 712 12月 7 2005 ChangeLog
-rw-r--r-- 1 5094 bin 1857 12月 7 2005 config.h
-rw-r--r-- 1 5094 bin 1727 12月 7 2005 config.h.in
-rwxr-xr-x 1 5094 bin 161353 12月 7 2005 configure
-rw-r--r-- 1 5094 bin 861 12月 7 2005 configure.in
-rw-r--r-- 1 5094 bin 17992 8月 15 2001 COPYING
-rwxr-xr-x 1 5094 bin 14841 9月 7 2005 depcomp
-rw-r--r-- 1 5094 bin 1181 9月 19 2005 getdata22.c
-rw-r--r-- 1 5094 bin 461 9月 19 2005 getdata22.h
-rw-r--r-- 1 5094 bin 2064 9月 19 2005 getdata24.c
-rw-r--r-- 1 5094 bin 461 9月 19 2005 getdata24.h
-rw-r--r-- 1 5094 bin 2236 9月 19 2005 getdata26.c
-rw-r--r-- 1 5094 bin 456 9月 19 2005 getdata26.h
-rw-r--r-- 1 5094 bin 7761 12月 7 2005 getdata.c
-rw-r--r-- 1 5094 bin 1044 9月 19 2005 getdata.h
-rw-r--r-- 1 5094 bin 7831 8月 15 2001 INSTALL
-rwxr-xr-x 1 5094 bin 5598 8月 15 2001 install-sh
-rw-r--r-- 1 5094 bin 1180 9月 19 2005 Makefile.am
-rw-r--r-- 1 5094 bin 24984 12月 7 2005 Makefile.in
-rwxr-xr-x 1 5094 bin 6283 8月 15 2001 missing
-rwxr-xr-x 1 5094 bin 724 8月 15 2001 mkinstalldirs
-rw-r--r-- 1 5094 bin 3594 9月 19 2005 README
-rw-r--r-- 1 5094 bin 18 1月 27 2001 rpc.rstatd.8
-rw-r--r-- 1 5094 bin 3660 12月 7 2005 rstat_clnt.c
-rw-r--r-- 1 5094 bin 1155 9月 12 2005 rstatd.8
-rw-r--r-- 1 5094 bin 4155 9月 7 2005 rstat_main.c
-rw-r--r-- 1 5094 bin 6525 9月 7 2005 rstat_proc.c
-rw-r--r-- 1 5094 bin 1632 9月 7 2005 rstat_proc.h
-rw-r--r-- 1 5094 bin 6562 12月 7 2005 rstat_svc.c
-rw-r--r-- 1 5094 bin 4870 8月 15 2001 rstat.x
-rw-r--r-- 1 5094 bin 27089 12月 7 2005 rstat_xdr.c
-rw-r--r-- 1 5094 bin 1611 1月 27 2001 rsysinfo.1
-rw-r--r-- 1 5094 bin 5662 9月 7 2005 rsysinfo.c
-rw-r--r-- 1 5094 bin 1734 1月 27 2001 rup.1
-rw-r--r-- 1 5094 bin 8737 9月 7 2005 rup.c
[root@localhost rpc.rstatd-4.0.1]# ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
/home/rpc.rstatd-4.0.1/missing: Unknown `--run' option
Try `/home/rpc.rstatd-4.0.1/missing --help' for more information
configure: WARNING: `missing' script is too old or missing
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gawk... (cached) gawk
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln -s works... yes
checking whether make sets $(MAKE)... (cached) yes
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking syslog.h usability... yes
checking syslog.h presence... yes
checking for syslog.h... yes
checking whether time.h and sys/time.h may both be included... yes
checking whether gcc needs -traditional... no
checking for ANSI C header files... (cached) yes
checking return type of signal handlers... void
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
[root@localhost rpc.rstatd-4.0.1]# make
rm -f rstat.h
rpcgen -h -o rstat.h rstat.x
make all-am
make[1]: Entering directory `/home/rpc.rstatd-4.0.1'
if gcc -DHAVE_CONFIG_H -I. -I. -I. -g -O2 -MT rup.o -MD -MP -MF ".deps/rup.Tpo" -c -o rup.o rup.c; \
then mv -f ".deps/rup.Tpo" ".deps/rup.Po"; else rm -f ".deps/rup.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I. -g -O2 -MT rstat_xdr.o -MD -MP -MF ".deps/rstat_xdr.Tpo" -c -o rstat_xdr.o rstat_xdr.c; \
then mv -f ".deps/rstat_xdr.Tpo" ".deps/rstat_xdr.Po"; else rm -f ".deps/rstat_xdr.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I. -g -O2 -MT rstat_clnt.o -MD -MP -MF ".deps/rstat_clnt.Tpo" -c -o rstat_clnt.o rstat_clnt.c; \
then mv -f ".deps/rstat_clnt.Tpo" ".deps/rstat_clnt.Po"; else rm -f ".deps/rstat_clnt.Tpo"; exit 1; fi
gcc -g -O2 -o rup rup.o rstat_xdr.o rstat_clnt.o
if gcc -DHAVE_CONFIG_H -I. -I. -I. -g -O2 -MT rsysinfo.o -MD -MP -MF ".deps/rsysinfo.Tpo" -c -o rsysinfo.o rsysinfo.c; \
then mv -f ".deps/rsysinfo.Tpo" ".deps/rsysinfo.Po"; else rm -f ".deps/rsysinfo.Tpo"; exit 1; fi
gcc -g -O2 -o rsysinfo rsysinfo.o rstat_xdr.o rstat_clnt.o
if gcc -DHAVE_CONFIG_H -I. -I. -I. -g -O2 -MT rstat_svc.o -MD -MP -MF ".deps/rstat_svc.Tpo" -c -o rstat_svc.o rstat_svc.c; \
then mv -f ".deps/rstat_svc.Tpo" ".deps/rstat_svc.Po"; else rm -f ".deps/rstat_svc.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I. -g -O2 -MT rstat_proc.o -MD -MP -MF ".deps/rstat_proc.Tpo" -c -o rstat_proc.o rstat_proc.c; \
then mv -f ".deps/rstat_proc.Tpo" ".deps/rstat_proc.Po"; else rm -f ".deps/rstat_proc.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I. -g -O2 -MT rstat_main.o -MD -MP -MF ".deps/rstat_main.Tpo" -c -o rstat_main.o rstat_main.c; \
then mv -f ".deps/rstat_main.Tpo" ".deps/rstat_main.Po"; else rm -f ".deps/rstat_main.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I. -g -O2 -MT getdata.o -MD -MP -MF ".deps/getdata.Tpo" -c -o getdata.o getdata.c; \
then mv -f ".deps/getdata.Tpo" ".deps/getdata.Po"; else rm -f ".deps/getdata.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I. -g -O2 -MT getdata22.o -MD -MP -MF ".deps/getdata22.Tpo" -c -o getdata22.o getdata22.c; \
then mv -f ".deps/getdata22.Tpo" ".deps/getdata22.Po"; else rm -f ".deps/getdata22.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I. -g -O2 -MT getdata24.o -MD -MP -MF ".deps/getdata24.Tpo" -c -o getdata24.o getdata24.c; \
then mv -f ".deps/getdata24.Tpo" ".deps/getdata24.Po"; else rm -f ".deps/getdata24.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I. -g -O2 -MT getdata26.o -MD -MP -MF ".deps/getdata26.Tpo" -c -o getdata26.o getdata26.c; \
then mv -f ".deps/getdata26.Tpo" ".deps/getdata26.Po"; else rm -f ".deps/getdata26.Tpo"; exit 1; fi
gcc -g -O2 -o rpc.rstatd rstat_svc.o rstat_xdr.o rstat_proc.o rstat_main.o getdata.o getdata22.o getdata24.o getdata26.o
make[1]: Leaving directory `/home/rpc.rstatd-4.0.1'
[root@localhost rpc.rstatd-4.0.1]# make install
make install-am
make[1]: Entering directory `/home/rpc.rstatd-4.0.1'
make[2]: Entering directory `/home/rpc.rstatd-4.0.1'
test -z "/usr/local/bin" || mkdir -p -- . "/usr/local/bin"
/usr/bin/install -c 'rup' '/usr/local/bin/rup'
/usr/bin/install -c 'rsysinfo' '/usr/local/bin/rsysinfo'
test -z "/usr/local/sbin" || mkdir -p -- . "/usr/local/sbin"
/usr/bin/install -c 'rpc.rstatd' '/usr/local/sbin/rpc.rstatd'
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/rpc.rstatd-4.0.1'
make[1]: Leaving directory `/home/rpc.rstatd-4.0.1'
[root@localhost rpc.rstatd-4.0.1]#
[root@localhost rpc.rstatd-4.0.1]#
[root@localhost rpc.rstatd-4.0.1]# ./rpc.rstatd
[root@localhost rpc.rstatd-4.0.1]# rpcinfo -p
program vers proto port service
100000 4 tcp 111 portmapper
100000 3 tcp 111 portmapper
100000 2 tcp 111 portmapper
100000 4 udp 111 portmapper
100000 3 udp 111 portmapper
100000 2 udp 111 portmapper
100024 1 udp 54696 status
100024 1 tcp 36643 status
100001 5 udp 888 rstatd
100001 3 udp 888 rstatd
100001 2 udp 888 rstatd
100001 1 udp 888 rstatd
[root@localhost rpc.rstatd-4.0.1]# rpcinfo -p
program vers proto port service
100000 4 tcp 111 portmapper
100000 3 tcp 111 portmapper
100000 2 tcp 111 portmapper
100000 4 udp 111 portmapper
100000 3 udp 111 portmapper
100000 2 udp 111 portmapper
100024 1 udp 54696 status
100024 1 tcp 36643 status
100001 5 udp 888 rstatd
100001 3 udp 888 rstatd
100001 2 udp 888 rstatd
100001 1 udp 888 rstatd
[root@localhost rpc.rstatd-4.0.1]# 出错：
-bash: /etc/init.d/rpcbind: No such file or directory
[root@izbp1epaqh5z52rygsq05oz init.d]# rpcinfo -p
program vers proto port service
100000 4 tcp 111 portmapper
100000 3 tcp 111 portmapper
100000 2 tcp 111 portmapper
100000 4 udp 111 portmapper
100000 3 udp 111 portmapper
100000 2 udp 111 portmapper
[root@izbp1epaqh5z52rygsq05oz init.d]# rpcinfo -p
program vers proto port service
100000 4 tcp 111 portmapper
100000 3 tcp 111 portmapper
100000 2 tcp 111 portmapper
100000 4 udp 111 portmapper
100000 3 udp 111 portmapper
100000 2 udp 111 portmapper
100001 5 udp 968 rstatd 少服务
100001 3 udp 968 rstatd
100001 2 udp 968 rstatd
100001 1 udp 968 rstatd
[root@izbp1epaqh5z52rygsq05oz init.d]# service nfslock start
Redirecting to /bin/systemctl start nfslock.service
[root@izbp1epaqh5z52rygsq05oz init.d]# rpcinfo -p
program vers proto port service
100000 4 tcp 111 portmapper
100000 3 tcp 111 portmapper
100000 2 tcp 111 portmapper
100000 4 udp 111 portmapper
100000 3 udp 111 portmapper
100000 2 udp 111 portmapper
100001 5 udp 968 rstatd
100001 3 udp 968 rstatd
100001 2 udp 968 rstatd
100001 1 udp 968 rstatd
100024 1 udp 52833 status
100024 1 tcp 46523 status
[root@izbp1epaqh5z52rygsq05oz init.d]#
查看prc服务
100001 1 udp 813 rstatd
[root@izbp1epaqh5z52rygsq05oz sbin]# service portmap start
Redirecting to /bin/systemctl start portmap.service
Failed to start portmap.service: Unit not found.
[root@izbp1epaqh5z52rygsq05oz sbin]# service rpcbind status
Redirecting to /bin/systemctl status rpcbind.service
● rpcbind.service - RPC bind service
Loaded: loaded (/usr/lib/systemd/system/rpcbind.service; indirect; vendor preset: enabled)
Active: active (running) since Sun 2018-05-06 16:32:31 CST; 1h 2min ago
Main PID: 13787 (rpcbind)
CGroup: /system.slice/rpcbind.service
└─13787 /sbin/rpcbind -w
May 06 16:32:31 izbp1epaqh5z52rygsq05oz systemd[1]: Starting RPC bind service...
May 06 16:32:31 izbp1epaqh5z52rygsq05oz systemd[1]: Started RPC bind service.
[root@izbp1epaqh5z52rygsq05oz sbin]# 当前名称：rpc.rstatd安装
网页地址：http://ybzwz.com/article/ghogjj.html
